From marius at breakpoint.co.za Thu Mar 5 06:19:23 2009 From: marius at breakpoint.co.za (Marius van Vuuren) Date: Thu, 5 Mar 2009 16:19:23 +0200 Subject: [cam-discuss] CAM on OpenSolaris 2008.11 and J4200 Message-ID: Hi is there any particular way to setup CAM 6.2 on OpenSol? I followed the documentation installed the cam patches and everything worked on my one machine. I did EXACTLY the same on another machine and it just does not see the J4200 that is connected to it. The OS can see the drives and I can work with them buy I cannot upgrade firmware on it. If I connect it to my other 4150 it works. What could be the issue? Any ideas? -------------- next part -------------- An HTML attachment was scrubbed... URL: From Owen.Hall at Sun.COM Thu Mar 5 09:21:39 2009 From: Owen.Hall at Sun.COM (Owen Hall) Date: Thu, 05 Mar 2009 09:21:39 -0800 Subject: [cam-discuss] CAM on OpenSolaris 2008.11 and J4200 In-Reply-To: References: Message-ID: <49B00A23.7020505@sun.com> What does the log file /var/opt/SUNWsefms/log/fms.0 say? If you run the undocumented service command: /opt/SUNWsefms/sbin/ras_admin discover_inband does the device get listed? Marius van Vuuren wrote: > Hi is there any particular way to setup CAM 6.2 on OpenSol? > > I followed the documentation installed the cam patches and everything > worked on my one machine. > > I did EXACTLY the same on another machine and it just does not see the > J4200 that is connected to it. > The OS can see the drives and I can work with them buy I cannot > upgrade firmware on it. > > If I connect it to my other 4150 it works. > > What could be the issue? Any ideas? > > > ------------------------------------------------------------------------ > > _______________________________________________ > cam-discuss mailing list > cam-discuss at opensolaris.org > http://mail.opensolaris.org/mailman/listinfo/cam-discuss > From marius at breakpoint.co.za Sun Mar 8 06:26:14 2009 From: marius at breakpoint.co.za (Marius van Vuuren) Date: Sun, 8 Mar 2009 15:26:14 +0200 Subject: [cam-discuss] CAM on OpenSolaris 2008.11 and J4200 In-Reply-To: <49B00A23.7020505@sun.com> References: <49B00A23.7020505@sun.com> Message-ID: Hi, I swapped the IO modules around and that seemed to solve the problem ( A re-seat would probably have done the same), just bugs be that it worked on the one machine even after I swapped around the SAS controller cards. Everything is working now. Thanks Owen! On Thu, Mar 5, 2009 at 7:21 PM, Owen Hall wrote: > > What does the log file /var/opt/SUNWsefms/log/fms.0 say? If you run the > undocumented service command: > > /opt/SUNWsefms/sbin/ras_admin discover_inband > > does the device get listed? > > Marius van Vuuren wrote: > >> Hi is there any particular way to setup CAM 6.2 on OpenSol? >> >> I followed the documentation installed the cam patches and everything >> worked on my one machine. >> >> I did EXACTLY the same on another machine and it just does not see the >> J4200 that is connected to it. >> The OS can see the drives and I can work with them buy I cannot upgrade >> firmware on it. >> >> If I connect it to my other 4150 it works. >> >> What could be the issue? Any ideas? >> >> >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> cam-discuss mailing list >> cam-discuss at opensolaris.org >> http://mail.opensolaris.org/mailman/listinfo/cam-discuss >> >> > > -- Marius van Vuuren Technical Specialist Office Tel: +27 (021) 975 6434 Cell: +27 (0)84 449 2067 http://www.breakpoint.co.za Breakpoint Solutions -------------- next part -------------- An HTML attachment was scrubbed... URL: From mr.bmonroe at gmail.com Tue Mar 31 14:07:05 2009 From: mr.bmonroe at gmail.com (Brett Monroe) Date: Tue, 31 Mar 2009 14:07:05 -0700 Subject: [cam-discuss] Cam Email Filters Message-ID: <7b6166860903311407n120a2b36gc23ffa31f2f707d@mail.gmail.com> Hey all, Has anyone successfully set up email filters? I have a number of 2540s on sketchy networks and I constantly get spammed with CommunicationLostEvent messages. I set up a filter with it's event code (70.12.31) and set its "Decreased Severity" to "No Event" but it doesn't help. I still get spammed. Is this just a non-working part of CAM or am I doing something wrong? Thanks --Brett -------------- next part -------------- An HTML attachment was scrubbed... URL: