[fm-discuss] Re: Re: FMRI Reference Documentation?

[Cibrario, Robert J.]

Looks the same to me:


(mine):
Memory Module Groups:
--------------------------------------------------
ControllerID   GroupID  Labels         Status
--------------------------------------------------
0              0        MB/P0/B0/D0
0              0        MB/P0/B0/D1
0              1        MB/P0/B1/D0
0              1        MB/P0/B1/D1
1              0        MB/P1/B0/D0
1              0        MB/P1/B0/D1
1              1        MB/P1/B1/D0
1              1        MB/P1/B1/D1




Btw, I ran the commands in the two windows as suggested. In the first,
the console prompt never returned (last line output was fmsim: debuggers
should attach to PID 4756". Should it have?

In the second it returned the following:
"e.inj: 1: syntax error near "
fminject: parsing failed - 1 error

I used "... com.sun:fm:fmd4756 ..." as this was the pid reported in the
first window.
 
rc
-----Original Message-----
From: Gavin.Maltby at Sun.COM [mailto:Gavin.Maltby at Sun.COM] 
Sent: Wednesday, September 27, 2006 11:58 AM
To: Cibrario, Robert J.
Cc: fm-discuss at opensolaris.org
Subject: Re: [fm-discuss] Re: Re: FMRI Reference Documentation?

Hi,



On 09/27/06 16:45, Cibrario, Robert J. wrote:
> I have 4GB (8 x 512MB) installed in banks 0-3 & 16-19:
> 
> p/o prtdiag:
> 
> Bank Table:
> -----------------------------------------------------------
>            Physical Location
> ID       ControllerID  GroupID   Size       Interleave Way
> -----------------------------------------------------------
> 0        0             0         512MB           0,1,2,3
> 1        0             1         512MB
> 2        0             1         512MB
> 3        0             0         512MB
> 16       1             0         512MB           0,1,2,3
> 17       1             1         512MB
> 18       1             1         512MB
> 19       1             0         512MB
> 
> 
> If I do need to adjust unum, please tell me how. Otherwise I'll give
it
> a shot.
> thanks

The machine I took this from has a very similar arrangement:

============================ Memory Configuration
============================
Segment Table:
-----------------------------------------------------------------------
Base Address       Size       Interleave Factor  Contains
-----------------------------------------------------------------------
0x0                2GB               4           BankIDs 0,1,2,3
0x1000000000       2GB               4           BankIDs 16,17,18,19

Bank Table:
-----------------------------------------------------------
            Physical Location
ID       ControllerID  GroupID   Size       Interleave Way
-----------------------------------------------------------
0        0             0         512MB           0,1,2,3
1        0             1         512MB
2        0             1         512MB
3        0             0         512MB
16       1             0         512MB           0,1,2,3
17       1             1         512MB
18       1             1         512MB
19       1             0         512MB

Memory Module Groups:
--------------------------------------------------
ControllerID   GroupID  Labels         Status
--------------------------------------------------
0              0        MB/P0/B0/D0
0              0        MB/P0/B0/D1
0              1        MB/P0/B1/D0	<<<<<
0              1        MB/P0/B1/D1	<<<<<
1              0        MB/P1/B0/D0
1              0        MB/P1/B0/D1
1              1        MB/P1/B1/D0
1              1        MB/P1/B1/D1

There are only 4 dimms slots per cpu on a v240.  The injection
file I attached had a resource unum of "MB/P0/B1: B1/D0 B1/D1"
which are the arrowed dimms above.  I'm sure you'll have the same.

Cheers

Gavin