[laptop-discuss] Re: Cardbus report: PCMCIA CDMA modem

[Marc Lobelle]

I had a similar problem. here is what I posted yesterday on the solarisonintel list:

Hello folks,

I'm trying to configure a PCMCIA modem  (actually an OPTION Globetrotter GPRS 
modem, but the problem occurs before this matters) on a SOLARIS10 laptop with 
the cardbus drivers from the opensolaris site.

The systems finds the modem when I insert it and creates  the devices.

However if I try 

tip /dev/cua0 (or someting equivalent with kermit) 

the system freezes until I remove the card. Everithing then gets "normal" 
again.

Here is what prtconf -v says about this device: 

               serial, instance #0
                    Driver properties:
                        name='interrupts' type=int items=1 dev=none
                            value=00000001
                        name='reg' type=int items=6 dev=none
                            value=24000000.00000000.00000000.21000000.00000000.
00000007
                    Hardware properties:
                        name='device_type' type=string items=1
                            value='serial'
                        name='model' type=string items=1
                            value='Option International,GSM/GPRS 
GlobeTrotter,001,A'
                        name='socket' type=int items=1
                            value=00000000
                        name='compatible' type=string items=4
                            value='pccard,Option_International,GSM/GPRS_GlobeTr
otter,001,A
' + 'pccard13,0' + 'pccard,serial' + 'serial'
                    Register Specifications:
                        Phys hi=0x24000000, Phys lo=0x0, Phys len=0
                        Phys hi=0x21000000, Phys lo=0x0, Phys len=7
                    Interrupt Specifications:
                        Interrupt Priority=0x6 (ipl 6)
                    Device Minor Nodes:
                        dev=(191,0)
                            dev_path=/pci at 0,0/pci8086,2448 at 1e/pci10cf,10e6 at a/se
rial at 0:pcse
r
                                spectype=chr type=minor
                                dev_link=/dev/term/pc0
                        dev=(191,128)
                            dev_path=/pci at 0,0/pci8086,2448 at 1e/pci10cf,10e6 at a/se
rial at 0:pcse
r,cu
                                spectype=chr type=minor
                                dev_link=/dev/cua/pc0


Has anybody an idea about what might be wrong and what to do about it ?

Thanks

Marc
 
 
This message posted from opensolaris.org