Integrate ngrep into Solaris [PSARC/2008/562 FastTrack timeout 09/11/2008]
Brian Utterback
blu at sac.sfbay.sun.com
Thu Sep 4 05:03:16 PDT 2008
I am sponsoring the following fast-track for Martina Tomisova. This case
proposes to integrate the ngrep open-source utility into the ON consolidation.
A patch binding is requested.
Template Version: @(#)sac_nextcase %I% %G% SMI
This information is Copyright 2008 Sun Microsystems
1. Introduction
1.1. Project/Component Working Name:
Integrate ngrep into Solaris
1.2. Name of Document Author/Supplier:
Author: Martina Tomisova
1.3 Date of This Document:
04 September, 2008
4. Technical Description
Proposal:
Integrate ngrep into Solaris.
Detail:
ngrep is a tool for ?grepping? specific information in network
packets. ngrep strives to provide most of GNU grep's common
features, applying them to the network layer. ngrep is a
pcap-aware tool that will allow you to specify extended regular
or hexadecimal expressions to match against data payloads of
packets. It currently recognizes IPv4, TCP, UDP, ICMPv4, IGMP
and Raw across Ethernet, PPP, SLIP, FDDI, Token Ring and null
interfaces, and understands BPF filter logic in the same fashion
as more common packet sniffing tools, such as tcpdump and snoop.
The current version of ngrep is 1.45 at the time of this case.
Exported Interfaces:
SUNWngrep Uncommitted Package name
/usr/sbin/ngrep Committed Executable location
ngrep Uncommitted Commandline syntax
Imported Interfaces:
SUNWlibpcap Libraries (libpcap.so)
Security:
RBAC - Anyone who has a role which contains the Network
Management privileges can execute the ngrep as a root. (no SUID
bit for all, just line added to /etc/security/exec_attr as for
other sniffing tools like snoop).
There was an '-R' option that prevents ngrep from dropping the
root privileges after it starts the capturing. It could be
dangerous (one never knows what will be received from the
network). This option has been removed.
References:
[1] http://ngrep.sourceforge.net/
Author(s) of ngrep: Jordan Ritter <jpr5 at darkridge.com>
[2] 6721123 - Integrate ngrep into Solaris.
List of new files:
usr/sbin/ngrep
usr/share/man/man1m/ngrep.1m
6. Resources and Schedule
6.4. Steering Committee requested information
6.4.1. Consolidation C-team Name:
on
6.5. ARC review type: FastTrack
6.6. ARC Exposure: open
Proposes man page:
User Manuals NGREP(1M)
NAME
ngrep - network grep
SYNOPSIS
ngrep <-hNXViwqpevxlDtTRM> <-IO pcap_dump > < -n num > < -d
dev > < -A num > < -s snaplen > < -S limitlen > < -W
normal|byline|single|none > < -c cols > < -P char > < -F
file > < match expression > < bpf filter >
DESCRIPTION
ngrep strives to provide most of GNU grep's common features,
applying them to the network layer. ngrep is a pcap-aware
tool that will allow you to specify extended regular expres-
sions to match against data payloads of packets. It
currently recognizes TCP, UDP and ICMP across Ethernet, PPP,
SLIP, FDDI and null interfaces, and understands bpf filter
logic in the same fashion as more common packet sniffing
tools, such as tcpdump(1M) and snoop(1).
Ngrep makes no effort to validate input from live or offline
sources as it is focused more on performance and handling
large amounts of data than protocol correctness, which is
most often a fair assumption to make. However, sometimes it
matters and thus as a rule ngrep will try to be defensive
and drop any root privileges it might have after started
catching of packets.
OPTIONS
-h Display help/usage information.
-N Show sub-protocol number along with single-character
identifier (useful when observing raw or unknown proto-
cols).
-X Treat the match expression as a hexadecimal string.
See the explanation of match expression below.
-V Display version information.
-i Ignore case for the regex expression.
-w Match the regex expression as a word.
*nux Last change: November 2006 1
User Manuals NGREP(1M)
-q Be quiet; don't output any information other than
packet headers and their payloads (if relevant).
-p Don't put the interface into promiscuous mode.
-e Show empty packets. Normally empty packets are dis-
carded because they have no payload to search. If
specified, empty packets will be shown, regardless of
the specified regex expression.
-v Invert the match; only display packets that don't
match.
-x Dump packet contents as hexadecimal as well as ASCII.
-l Make stdout line buffered.
-D When reading pcap_dump files, replay them at their
recorded time intervals (mimic realtime).
-t Print a timestamp in the form of YYYY/MM/DD
HH:MM:SS.UUUUUU everytime a packet is matched.
-T Print a timestamp in the form of +S.UUUUUU, indicating
the delta between packet matches.
-c cols
Explicitly set the console width to ``cols''. Note
that this is the console width, and not the full width
of what ngrep prints out as payloads; depending on the
output mode ngrep may print less than ``cols'' bytes
per line (indentation).
-F file
Read in the bpf filter from the specified filename.
This is a compatibility option for users familiar with
tcpdump. Please note that specifying ``-F'' will over-
ride any bpf filter specified on the command-line.
*nux Last change: November 2006 2
User Manuals NGREP(1M)
-P char
Specify an alternate character to signify non-printable
characters when displayed. The default is ``.''.
-W normal|byline|single|none
Specify an alternate manner for displaying packets,
when not in hexadecimal mode. The ``byline'' mode
honors embedded linefeeds, wrapping text only when a
linefeed is encountered. The ``none'' mode doesn't
wrap under any circumstance (entire payload is
displayed on one line). The ``single'' mode is concep-
tually the same as ``none'', except that everything
including IP and source/destination header information
is all on one line. ``normal'' is the default mode and
is only included for completeness. This option is
incompatible with ``-x''.
-s snaplen
Set the bpf caplen to snaplen (default 65536).
-S limitlen
Set the upper limit on the size of packets that ngrep
will look at. Useful for looking at only the first N
bytes of packets without changing the BPF snaplen.
-I pcap_dump
Input file pcap_dump into ngrep. Works with any pcap-
compatible dump file format. This option is useful for
searching for a wide range of different patterns over
the same packet stream.
-O pcap_dump
Output matched packets to a pcap-compatible dump file.
This feature does not interfere with normal output to
stdout.
-n num
Match only num packets total, then exit.
-d dev
By default ngrep will select a default interface to
listen on. Use this option to force ngrep to listen on
interface dev.
*nux Last change: November 2006 3
User Manuals NGREP(1M)
-A num
Dump num packets of trailing context after matching a
packet.
-W normal|byline|none
Alter the method by which ngrep displays packet pay-
load. ``normal'' mode represents the standard
behaviour, ``byline'' instructs ngrep to respect embed-
ded linefeeds (useful for observing HTTP transactions,
for instance), and ``none'' results in the payload on
one single line (useful for scripted processing of
ngrep output).
-c cols
Ignore the detected terminal width and force the column
width to the specified size.
-P char
Change the non-printable character from the default
``.'' to the character specified.
match expression
A match expression is either an extended regular
expression, or if the -X option is specified, a string
signifying a hexadecimal value. An extended regular
expression follows the rules as implemented by the GNU
regex library. Hexadecimal expressions can optionally
be preceded by `0x'. E.g., `DEADBEEF', `0xDEADBEEF'.
bpf filter
Selects a filter that specifies what packets will be
dumped. If no bpf filter is given, all IP packets seen
on the selected interface will be dumped. Otherwise,
only packets for which bpf filter is `true' will be
dumped.
The bpf filter consists of one or more primitives. Primi-
tives usually consist of an id (name or number) preceded by
one or more qualifiers. There are three different kinds of
qualifier:
type qualifiers say what kind of thing the id name or number
refers to. Possible types are host, net and port.
E.g., `host blort', `net 1.2.3', `port 80'. If there
is no type qualifier, host is assumed.
dir qualifiers specify a particular transfer direction to
*nux Last change: November 2006 4
User Manuals NGREP(1M)
and/or from id. Possible directions are src, dst, src
or dst and src and dst. E.g., `src foo', `dst net
1.2.3', `src or dst port ftp-data'. If there is no dir
qualifier, src or dst is assumed. For `null' link
layers (i.e. point to point protocols such as slip) the
inbound and outbound qualifiers can be used to specify
a desired direction.
proto
qualifiers are restricted to ip-only protocols. Possi-
ble protos are: tcp , udp and icmp. e.g., `udp src
foo' or `tcp port 21'. If there is no proto qualifier,
all protocols consistent with the type are assumed.
E.g., `src foo' means `ip and ((tcp or udp) src foo)',
`net bar' means `ip and (net bar)', and `port 53' means
`ip and ((tcp or udp) port 53)'.
In addition to the above, there are some special `primitive'
keywords that don't follow the pattern: gateway, broadcast,
less, greater and arithmetic expressions. All of these are
described below.
More complex filter expressions are built up by using the
words and, or and not to combine primitives. E.g., `host
blort and not port ftp and not port ftp-data'. To save typ-
ing, identical qualifier lists can be omitted. E.g., `tcp
dst port ftp or ftp-data or domain' is exactly the same as
`tcp dst port ftp or tcp dst port ftp-data or tcp dst port
domain'.
dst net net
True if the IP destination address of the packet has a
network number of net. Net may be either a name from
/etc/networks or a network number (see networks(4) for
details).
src net net
True if the IP source address of the packet has a net-
work number of net.
net net
True if either the IP source or destination address of
the packet has a network number of net.
net net mask mask
True if the IP address matches net with the specific
netmask. May be qualified with src or dst.
net net/len
True if the IP address matches net a netmask len bits
wide. May be qualified with src or dst.
dst port port
*nux Last change: November 2006 6
User Manuals NGREP(1M)
True if the packet is ip/tcp or ip/udp and has a desti-
nation port value of port. The port can be a number or
a name used in /etc/services (see tcp(4P) and udp(4P)).
If a name is used, both the port number and protocol
are checked. If a number or ambiguous name is used,
only the port number is checked (e.g., dst port 513
will print both tcp/login traffic and udp/who traffic,
and port domain will print both tcp/domain and
udp/domain traffic).
src port port
True if the packet has a source port value of port.
port port
True if either the source or destination port of the
packet is port. Any of the above port expressions can
be prepended with the keywords, tcp or udp, as in:
Allowable primitives are:
dst host host
True if the IP destination field of the packet is host,
which may be either an address or a name.
src host host
True if the IP source field of the packet is host.
host host
True if either the IP source or destination of the
packet is host. Any of the above host expressions can
be prepended with the keywords, ip, arp, or rarp as in:
ip host host
which is equivalent to:
ether dst ehost
*nux Last change: November 2006 5
User Manuals NGREP(1M)
True if the ethernet destination address is ehost.
Ehost may be either a name from /etc/ethers or a number
(see ethers(3N) for numeric format).
ether src ehost
True if the ethernet source address is ehost.
ether host ehost
True if either the ethernet source or destination
address is ehost.
gateway host
True if the packet used host as a gateway. I.e., the
ethernet source or destination address was host but
neither the IP source nor the IP destination was host.
Host must be a name and must be found in both
/etc/hosts and /etc/ethers. (An equivalent expression
is
ether host ehost and not host host
which can be used with either names or numbers for host
/ ehost.)
tcp src port port
which matches only tcp packets whose source port is
port.
less length
True if the packet has a length less than or equal to
length. This is equivalent to:
len <= length.
greater length
True if the packet has a length greater than or equal
to length. This is equivalent to:
len >= length.
ip proto protocol
True if the packet is an ip packet (see ip(4P)) of pro-
tocol type protocol. Protocol can be a number or one
of the names tcp, udp or icmp. Note that the identif-
iers tcp and udp are also keywords and must be escaped
via backslash (\), which is \\ in the C-shell.
ip broadcast
True if the packet is an IP broadcast packet. It
checks for both the all-zeroes and all-ones broadcast
conventions, and looks up the local subnet mask.
ip multicast
True if the packet is an IP multicast packet.
*nux Last change: November 2006 7
User Manuals NGREP(1M)
ip Abbreviation for:
ether proto ip
tcp, udp, icmp
Abbreviations for:
ip proto p
where p is one of the above protocols.
expr relop expr
True if the relation holds, where relop is one of >, <,
>=, <=, =, !=, and expr is an arithmetic expression
composed of integer constants (expressed in standard C
syntax), the normal binary operators [+, -, *, /, &,
|], a length operator, and special packet data acces-
sors. To access data inside the packet, use the fol-
lowing syntax:
proto [ expr : size ]
Proto is one of ip, tcp, udp or icmp, and indicates the
protocol layer for the index operation. The byte
offset, relative to the indicated protocol layer, is
given by expr. Size is optional and indicates the
number of bytes in the field of interest; it can be
either one, two, or four, and defaults to one. The
length operator, indicated by the keyword len, gives
the length of the packet.
For example, `ether[0] & 1 != 0' catches all multicast
traffic. The expression `ip[0] & 0xf != 5' catches all
IP packets with options. The expression `ip[6:2] &
0x1fff = 0' catches only unfragmented datagrams and
frag zero of fragmented datagrams. This check is
implicitly applied to the tcp and udp index operations.
For instance, tcp[0] always means the first byte of the
TCP header, and never means the first byte of an inter-
vening fragment.
Primitives may be combined using:
A parenthesized group of primitives and operators
(parentheses are special to the Shell and must be
escaped).
Negation (`!' or `not').
Concatenation (`&&' or `and').
Alternation (`||' or `or').
Negation has highest precedence. Alternation and concatena-
tion have equal precedence and associate left to right.
Note that explicit and tokens, not juxtaposition, are now
required for concatenation.
*nux Last change: November 2006 8
User Manuals NGREP(1M)
If an identifier is given without a keyword, the most recent
keyword is assumed. For example,
not host vs and ace
is short for
not host vs and host ace
which should not be confused with
not ( host vs or ace )
Expression arguments can be passed to ngrep as either a sin-
If an identifier is given without a keyword, the most recent
keyword is assumed. For example,
not host vs and ace
is short for
not host vs and host ace
which should not be confused with
not ( host vs or ace )
Expression arguments can be passed to ngrep as either a sin-
gle argument or as multiple arguments, whichever is more
convenient. Generally, if the expression contains Shell
metacharacters, it is easier to pass it as a single, quoted
argument. Multiple arguments are concatenated with spaces
before being parsed.
DIAGNOSTICS
Errors from ngrep, libpcap, and the GNU regex library are
all output to stderr.
AUTHOR
Written by Jordan Ritter <jpr5 at darkridge.com>.
REPORTING BUGS
Please report bugs to the ngrep's Sourceforge Bug Tracker,
located at
http://sourceforge.net/projects/ngrep/
Non-bug, non-feature-request general feedback should be sent
to the author directly by email.
NOTES
ALL YOUR BASE ARE BELONG TO US.
ATTRIBUTES
See attributes(5) for descriptions of the following attri-
butes:
box; cbp-1 | cbp-1 l | l . ATTRIBUTE TYPE ATTRIBUTE VALUE =
Availability SUNWngrep = Interface Stability Uncommitted
NOTES
Source for ngrep is available on http://opensolaris.org.
*nux Last change: November 2006 9
More information about the opensolaris-arc
mailing list