[storage-discuss] [Fwd: Only seeing 1 Disk (out of 5) on the FC Hosts with Comstar]

[Sumit Gupta]

Actually for those commands you need to run mdb -k first (those are mdb 
commands).

Other information you can provide us is the output of the following 
commands.

svcs stmf
stmfadm list-target -v
stmfadm list-lu -v
stmfadm list-hg

(and for each logical unit that you created)
stmfadm list-view -l <the long hex number>

Sumit

Qiong-Yu Kelly Hu - Sun Microsystem wrote:
> Hi Roger,
>
> This should not be related to the raw disk. Our implementation support 
> raw disk, initiator does not see any difference for it from file-based LU.
>
> Could you please run
> ::stmf_ilports|::ilport2iport|::fct_irps |::print fct_i_remote_port_t 
> irp_rp|::print fct_remote_port_t
> then
> ::stmf_ilports|::ilport2iport|::fct_irps |::print fct_i_remote_port_t 
> irp_session|::print stmf_scsi_session_t ss_stmf_private|::print 
> stmf_i_scsi_session_t iss_sm|::print stmf_lun_map_t
> in mdb?
>
> I want to make sure all the LUNs is correctly configured and added to 
> each session.
>
> Thanks,
> Kelly
>
> Roger Dong wrote:
>   
>> ------------------------------------------------------------------------
>>
>> ??:
>> [storage-discuss] Only seeing 1 Disk (out of 5) on the FC Hosts with 
>> Comstar
>> ???:
>> Roger Singh <wastelandgallery at yahoo.com>
>> ??:
>> Wed, 09 Apr 2008 01:31:23 -0700 (PDT)
>> ???:
>> storage-discuss at opensolaris.org
>>
>> ???:
>> storage-discuss at opensolaris.org
>>
>>
>> Hi,
>>
>> I am having issues with Comstar on OpenSolaris b85.  Sorry, you'll just have to bear with me.  I've been an OpenSolaris user for about 6 hours :)
>>
>> Config:
>>
>> SAN (OpenSolaris with qle2462) connected to Qlogic 1400 FC Switch.  3 other computers (Host Applications with Atto FC42ES) connected to FC Switch.
>>
>> I wanted to load balance 5  drives over my dual FC card in the Solaris (qle2462).  So, it'd be 3 or 2 drives per Port.
>>
>> Before going dual Port, I wanted to get one Port working first.
>>
>> I used "create-hg" to create the group "san1"
>>
>> I used "add-hg-member -g san1" to add one of the Atto wwn ports.
>>
>> I then used "create-lu" /dev/rdsk/ct0d0p0 (I did this to all 5 drives [ct1d0p0, ct2d0p0, etc...)  I got my hex number for each drive.
>>
>> I then did "add-view -h san1" to 3 of the drives that i wanted to go through that port.
>>
>> Now, I noticed my first issue when I typed in format, and I didn't see the LUNs listed.  I figured it's because I did the rawdisk instead of reserving space.
>>
>> So when I went to the Windows PC with the Atto card and did a re-scan for new hardware.  Only one of the drives shows up in Computer Management.
>>
>> Any Help would be appreciated.
>>
>> Take care.  any help would be appreciated.
>>  
>>  
>> This message posted from opensolaris.org
>> _______________________________________________
>> storage-discuss mailing list
>> storage-discuss at opensolaris.org
>> http://mail.opensolaris.org/mailman/listinfo/storage-discuss
>>   
>>     
>
> _______________________________________________
> storage-discuss mailing list
> storage-discuss at opensolaris.org
> http://mail.opensolaris.org/mailman/listinfo/storage-discuss
>