[ug-bosug] belenix h/d install boot issue

[Moinak Ghosh]

Anil Gulecha wrote:

>
>
> On 6/26/06, *Moinak Ghosh* <Moinak.Ghosh at sun.com 
> <mailto:Moinak.Ghosh at sun.com>> wrote:
>
>     Anil Gulecha wrote:
>     > The install was succesful:
>     > The PM showed:
>     > 1. ( 1535-..)
>     > 2. (1- 1534)
>
>        Is this a secondary master harddisk ?
>
>
> No.. Upon installing i disconnected the other hard disk (which was the 
> master), The other device was the cdrom drive.

   So that explains the problem. You had the master harddisk connected while
   installing, so it got hd1 for the other 40gb harddisk. After you 
disconnect
   the master, the 40gb one is the only harddisk and becomes hd0.

>     >
>     > How do I start off KDE? What are the commands I have to run/ config
>     > files I've to edit, to boot directly to the graphic mode?
>        Login to the command line and execute startkde. Direct graphic boot
>     needs configuration
>        of the the KDM (K Display Manager) and registering it as an SMF
>     service this is one of
>        the priority TODOs. It should come pre-configured on the CD for
>     hdinstall.
>
>
> Will try that.

   This is still not implemented; needs to be done.

Regards,
Moinak.

>
> Regards
> Anil
>
>------------------------------------------------------------------------
>
>_______________________________________________
>ug-bosug mailing list
>List-Unsubscribe: mailto:ug-bosug-unsubscribe at opensolaris.org
>List-Owner: mailto:ug-bosug-owner at opensolaris.org
>List-Archives: http://www.opensolaris.org/jive/forum.jspa?forumID=54
>  
>