[ug-bosug] Re: Réf. : Re: R: [sysadmin-discuss] How to get disk parameters?
Atul Vidwansa
atulvid at gmail.com
Thu Apr 19 04:44:58 PDT 2007
Hi Jeremy,
I installed the latest explorer, but its output shows all the same
Serial numbers. Any clues?
[root at thumper Setup]$ /opt/SUNWexplo/bin/diskinfo.i386
/dev/rdsk/c3t0d0s2: No such file or directory
AVAILABLE SCSI DEVICES:
Location Vendor Product Rev Serial #
c0t0d0 ATA HITACHI HDS7250S A20A KRVN03
c0t1d0 ATA HITACHI HDS7250S A20A KRVN03
c0t2d0 ATA HITACHI HDS7250S A20A KRVN03
c0t3d0 ATA HITACHI HDS7250S A20A KRVN03
c0t4d0 ATA HITACHI HDS7250S A20A KRVN03
c0t5d0 ATA HITACHI HDS7250S A20A KRVN03
c0t6d0 ATA HITACHI HDS7250S A20A KRVN03
c0t7d0 ATA HITACHI HDS7250S A20A KRVN03
c1t0d0 ATA HITACHI HDS7250S A20A KRVN03
c1t1d0 ATA HITACHI HDS7250S A20A KRVN03
c1t2d0 ATA HITACHI HDS7250S A20A KRVN03
c1t3d0 ATA HITACHI HDS7250S A20A KRVN03
c1t4d0 ATA HITACHI HDS7250S A20A KRVN03
c1t5d0 ATA HITACHI HDS7250S A20A KRVN03
c1t6d0 ATA HITACHI HDS7250S A20A KRVN03
c1t7d0 ATA HITACHI HDS7250S A20A KRVN03
-Atul
On 4/19/07, jeremy.mauro at bnpparibas.com <jeremy.mauro at bnpparibas.com> wrote:
>
>
> There is also a tool in the Sun explorer:
> ls -al /opt/SUNWexplo/bin/diskinfo.*
> -r-xr-xr-x 1 root bin 36516 Apr 19 2006
> /opt/SUNWexplo/bin/diskinfo.i386
> -r-xr-xr-x 1 root bin 37064 Apr 19 2006
> /opt/SUNWexplo/bin/diskinfo.sparc
>
> here is the output:
> AVAILABLE SCSI DEVICES:
>
> Location Vendor Product Rev Serial #
>
> c0t0d0 TEAC CD-224E 19A TEAC
>
>
>
>
>
>
>
> *Internet*
> *atulvid at gmail.com*
>
> *Envoyé par : sysadmin-discuss-bounces at opensolaris.org*
>
> 19/04/2007 13:14
> Pour
> san2rini cc
> ug-bosug, opensolaris-discuss, sysadmin-discuss Objet
> Re: R: [sysadmin-discuss] How to get disk parameters?
>
>
>
>
>
>
>
> Hi Alf,
> Thanks for the information. But on my thumper box, iostat is not
> showing Serial No:
>
> [root at thumper /]$ iostat -E sd45
> sd45 Soft Errors: 37 Hard Errors: 0 Transport Errors: 0
> Vendor: ATA Product: HITACHI HDS7250S Revision: A20A Serial No:
> Size: 500.11GB <500107862016 bytes>
> Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
> Illegal Request: 37 Predictive Failure Analysis: 0
>
> It is showing the device ID though:
>
> [root at thumper /]$ iostat -Ei sd45
> sd45 Soft Errors: 37 Hard Errors: 0 Transport Errors: 0
> Vendor: ATA Product: HITACHI HDS7250S Revision: A20A Device Id:
> id1,sd at SATA_____HITACHI_HDS7250S______KRVN03ZAG2JHUD
> Size: 500.11GB <500107862016 bytes>
> Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
> Illegal Request: 37 Predictive Failure Analysis: 0
>
> How can I be sure that same disk is being used when thumper is booted
> in Linux.? On Linux "hdparm -I" will show the serial no.
>
> Regards,
> _Atul
>
> On 4/19/07, Alf <san2rini at fastwebnet.it> wrote:
> > iostat -E |grep <diskdrive>
> > You'll see the Ser. number next to it!
> >
> > cheers
> >
> > >----Messaggio originale----
> > >Dal: atulvid at gmail.com
> > >Data: 19/04/2007 6.46
> > >A: <opensolaris-discuss at opensolaris.org>, <
> sysadmin-discuss at opensolaris.org>,
> > <ug-bosug at opensolaris.org>
> > >Ogg: [sysadmin-discuss] How to get disk parameters?
> > >
> > >Hi,
> > > I want to get various disk parameters including disk serial
> > >numbers (or disk IDs). How do I do that on thumper with OpenSoalris?
> > >Is there any equivalent command for hdparm on Solaris?
> > >
> > >Regards,
> > >_Atul
> > >_______________________________________________
> > >sysadmin-discuss mailing list
> > >sysadmin-discuss at opensolaris.org
> > >http://mail.opensolaris.org/mailman/listinfo/sysadmin-discuss
> > >
> >
> >
> >
> >
> >
> _______________________________________________
> sysadmin-discuss mailing list
> sysadmin-discuss at opensolaris.org
> http://mail.opensolaris.org/mailman/listinfo/sysadmin-discuss
>
> This message and any attachments (the "message") is
> intended solely for the addressees and is confidential.
> If you receive this message in error, please delete it and
> immediately notify the sender. Any use not in accord with
> its purpose, any dissemination or disclosure, either whole
> or partial, is prohibited except formal approval. The internet
> can not guarantee the integrity of this message.
> BNP PARIBAS (and its subsidiaries) shall (will) not
> therefore be liable for the message if modified.
>
> ---------------------------------------------
>
> Ce message et toutes les pieces jointes (ci-apres le
> "message") sont etablis a l'intention exclusive de ses
> destinataires et sont confidentiels. Si vous recevez ce
> message par erreur, merci de le detruire et d'en avertir
> immediatement l'expediteur. Toute utilisation de ce
> message non conforme a sa destination, toute diffusion
> ou toute publication, totale ou partielle, est interdite, sauf
> autorisation expresse. L'internet ne permettant pas
> d'assurer l'integrite de ce message, BNP PARIBAS (et ses
> filiales) decline(nt) toute responsabilite au titre de ce
> message, dans l'hypothese ou il aurait ete modifie.
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mail.opensolaris.org/pipermail/ug-bosug/attachments/20070419/c097ce5c/attachment-0002.html
More information about the ug-bosug
mailing list