[ug-bosug] Problems with DHCP on my bge0

[Sanjeev Bagewadi]

Sriram,

Please check if nwam is causing any issues there ?
NWAM is now integrated but, is a little flaky as of now...
I was seeing something similar where the nwam went into a loop.

You can disable nwam using : svcadm disable nwam.
You could then try starting the DHCP for bge0.

Regards,
Sanjeev.

Sriram Narayanan wrote:
> Hello all:
>
> On a b68 SXCE, I see that bge0 is the ethernet device. This gets the
> IP address via DHCP, and all works well.
>
> On a xen-b66 SXCE, I see that bge0 is identified as an ethernet
> device, but Solaris is unable to get an IP address for this device.
>
> How do I diagnose the problem ?
>
> -- Sriram
> _______________________________________________
> ug-bosug mailing list
> List-Unsubscribe: mailto:ug-bosug-unsubscribe at opensolaris.org
> List-Owner: mailto:ug-bosug-owner at opensolaris.org
> List-Archives: http://www.opensolaris.org/jive/forum.jspa?forumID=54
>   


-- 
Solaris Revenue Products Engineering,
India Engineering Center,
Sun Microsystems India Pvt Ltd.
Tel:    x27521 +91 80 669 27521