[ug-bosug] Belenix 0.5 DVD/ 0.4.4 not working on out systems

[Moinak Ghosh]

Ajeeshrao.r wrote:
> hi guys,
>                 i wanted to setup Belenix in our Mtech lab PESIT. I started system with Started kit which has 0.4 belenix it is not showing graphics and restrating automatically. Even i tried with the Belenix 0.5 DVD it is also not showing any thing it starts the Gui but it is Blurred nothig apears just some lines mouse cursor is around 1cm sqare not clearly visible. Hardware System configuration is
>
> intel pentium D CPU 2.66 GHz
> 512 MB ram
> intel 102 board (not sure)
> 80 GB 7200 rpm HDD
> TFT monitor
>
> In that system already Win XP and Linux is working fine. Suggest the solution please
>   

   Video card/Monitor detection issue. Try this:

   Boot 0.5
   After a few things a screen displaying the Graphics Configuration 
will appear
   Change the driver to "vesa"
   Change the resolution to "1024x768"

   You can press TAB to navigate the fields.

   I had included the easy graphics configuration screen so that people 
can easily tweak
   settings if the display does not come properly. Just play with it a bit.

Regards,
Moinak.

>  
>  
> This message posted from opensolaris.org
> _______________________________________________
> ug-bosug mailing list
> List-Unsubscribe: mailto:ug-bosug-unsubscribe at opensolaris.org
> List-Owner: mailto:ug-bosug-owner at opensolaris.org
> List-Archives: http://www.opensolaris.org/jive/forum.jspa?forumID=54
>